Device : Xiaomi Redmi 9 Power
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 64 GB
LU Count : 6 [0x00DD4800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [86]
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20230424172020, V14.0.2.0.SJQINXM [Mon Apr 24 17:23:01 CST 2023]
Android Ver. : 12
Patch Level : 2023-04-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.1
Redmi 9 Powar EDL Point
Â
Redmi 9 Power EDL Point, Pattern/PIN, & FRP Unlock – One-Click Solution
Unlocking a Redmi 9 Power can be done easily using EDL mode and a professional tool like UMT. Follow these steps for a hassle-free unlocking process:
Steps to Unlock Redmi 9 Power Using EDL Mode:
Prepare Your Tools:
- UMT Dongle/Tool installed on your PC.
- A functional EDL cable or USB cable.
- A stable PC or laptop running Windows.
Enable EDL Mode:
- Open the back cover of the Redmi 9 Power carefully.
- Locate the EDL points (test points) on the motherboard.
- Short the EDL points using a tweezer or conductive tool while connecting the phone to the PC via USB cable.
- The device should now enter EDL mode (the PC will recognize it as “Qualcomm HS-USB QDLoader 9008”).
Open UMT Tool:
- Launch the UMT QC Fire module.
- Select the appropriate settings for the Redmi 9 Power model.
Unlock Process:
- Choose the required action:
- Remove Pattern/PIN Lock
- Remove FRP Lock
- Click the Start or Run button in the UMT tool.
- Choose the required action:
Wait for Completion:
- The tool will automatically detect the device and complete the unlocking process.
- Once done, disconnect the phone and reboot it.
Important Notes:
- Backup Data: Unlocking via EDL will erase all data on the device.
- Use Genuine Tools: Always use authorized tools like UMT to avoid bricking your device.
- Technical Knowledge Required: If you’re unfamiliar with EDL mode or hardware handling, consult a professional.
