Redmi 10C EDL Point & Frp UMT Unlock Miui 14 | ONE CLICK

 UMT QC Fire Tool: Installed on your PC.

1. Micro USB/Type-C Cable: To connect the phone to your computer.
2. Xiaomi Redmi 10C Test Point Diagram: Locate the test points on the motherboard.
3. PC with Drivers Installed:
   • Qualcomm USB Drivers
   • Xiaomi ADB/Fastboot Drivers
4. Tweezers or Jumper Wires: For bridging the test points.

5. Important Notes : बैटरी लगा के टेस्टिंग पॉइंट टच करना है

Steps to Unlock FRP via Test Point & UMT QC Fire:

1. Backup Your Data:

   • FRP removal will erase all data on the device.

2. Disassemble the Phone:

   • Carefully open the back panel of your Redmi 10C.
   • Locate the test points on the motherboard (refer to a test point diagram specific to Redmi 10C).

3. Prepare the Device for EDL Mode:

   • Use tweezers or jumper wires to short the test points.
   • While shorting the points, connect the phone to the PC using a USB cable.
   • The device should enter EDL Mode.

4. Launch UMT QC Fire:

   • Open the UMT QC Fire tool on your PC.
   • Navigate to the FRP section.

5. Select the Model:

   • Choose Xiaomi Redmi 10C or a compatible Qualcomm chipset from the list.

6. Start FRP Unlock Process:

   • Click FRP Reset or One Click FRP.
   • The tool will communicate with the device and reset the FRP.

7. Complete the Process:

   • Once the tool confirms the FRP unlock, disconnect the device.
   • Reassemble the phone and power it on.

8. Verify:

   • Setup the device and ensure the Google account lock is bypassed.

Important Notes:

• Ensure you have the correct version of UMT QC Fire for your device.
• Be cautious while handling the motherboard and test points to avoid permanent damage.
• If unsure, consult a professional technician.

Let me know if you need further assistance or test point diagrams for the Redmi 10C!