Vivo Y12 Y15 Y17 | New Security Pattern Frp Unlock with UMT

• • Warning

    • FRP unlocking is a legal procedure only if you own the device or have explicit permission from the owner.
    • Incorrect use of these tools can damage your device. Proceed at your own risk.

    ---

    Steps to Unlock FRP on Vivo Y12, Y15, Y17 with UMT:

    1. Download UMT Setup:
       • Install the latest version of UMT Dongle software from the official UMT support site.
    2. Prepare Your PC:
       • Install the necessary Vivo USB drivers on your computer.
    3. Boot the Vivo Device into Fastboot Mode:
       • Turn off the phone.
       • Press and hold Volume Down + Power until the phone boots Mode.
    4. Connect the Device:
       • Connect the phone to the PC using a compatible USB cable.
    5. Open UMT Tool:
       • Launch the UMTv2 – UltimateMTK2 software and select the Vivo FRP Tool or the dedicated module for Vivo devices.
    6. Select the Model:
       • Pattern and PIN Remove In the UMT interface, choose the appropriate Brand model *Auto* ( PL EXPLOIT choose VIVO V1 )
       • Format Functions choose Sefe format Button Execute )
    7. Unlock FRP:
       • FRP Google Account Remove appropriate Brand model *Auto* ( PL EXPLOIT choose VIVO V1 )
       • Format Functions choose Reset FRP Click on the Button Execute )
    8. Wait for the tool to detect the phone and execute the FRP unlock process.
    9. Reboot the Phone:
       • Once the process is complete, reboot the device. The FRP lock should be removed.

    ---

    Tips

    • Ensure that the UMT dongle license is active and updated.
    • Use genuine UMT hardware and software to avoid device bricking.
    • After unlocking, set up the phone with your Google account or preferred credentials.

    If you encounter issues, double-check the UMT logs for errors or refer to UMT’s official support forums for troubleshooting. 

  • FORMAT

• USING PL_EXLOIT [VIVO V1]

  Brand/Model : *Auto* / *Auto Detect*

  Operation : Safe Format

  BOOT CFG : [PL_EXPLOIT : ON]

  Waiting for Device…Found

  Port : MediaTek PreLoader USB VCOM (Android) (COM12)

  Device Path : \\?\usb#vid_0e8d&pid_2000#6&35a389a6&0&6

  #{a5dcbf10-6530-11d2-901f-00c04fb951ed}

  Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]

  Mode : PRELOADER

  Hw ID : MT6765 [0766] Helio P35/G35

  Details : 8A00,CA00,0000

  Sec. Config : [SBA:True] [SLA:False] [DAA:True]

  MEID : 538FF6F30A23B26119AA5E2162B44FCD

  SoC ID[0] : A05600447E4ACFDC40A9E7FC4EE45335

  SoC ID[1] : 936A131A96C5C5BD3F566CDFAB6C51BB

  Sending 1st DA..OK

  Jump DA Address…OK

  Syncing…OK

  Checksum Level is Storage

  Connection : preloader

  Speed : HIGH-SPEED

  Reading RAM Configuration…OK

  Running PL_EXPLOIT [1]…Done

  Sending 2nd DA…OK

  HRID : 5621541C1C9E05F268AE1581D52FBECB

  Int. RAM : 0x000000000003A000 [232.00 KB]

  Ext. RAM : 0x00000000C0000000 [3.00 GB]

  Flash ID : GP6BMB

  CID : 150100475036424D42010A10E4D8A657

  BOOT1 : 0x0000000000400000 [4.00 MB]

  BOOT2 : 0x0000000000400000 [4.00 MB]

  RPMB : 0x0000000001000000 [16.00 MB]

  USERAREA : 0x0000000E8F800000 [58.24 GB]

  PRE EOL : NORMAL

  Life. Est.A : 20%-30% LIFE TIME USED

  Life. Est.B : 20%-30% LIFE TIME USED

  Reading Partition Table…OK

  And. Ver. : 11

  Build Dt. : Mon Oct 21 14:35:25 CST 2024

  Display ID : RP1A.200720.012 release-keys

  Ver. Inc. : eng.compil.20241021.143917

  Locale : en-US

  Patch : 2022-05-01

  Bootloader : LOCKED

  Executing Safe Format…Done

  If phone stuck on recovery, try [Fix Recovery].

  Operation Finished.

  [UltimateMTK2 v1.6]

  Log Saved : 20241224_185919.log

• FRP

USING PL_EXLOIT [VIVO V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM12)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&35a389a6&0&6
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 538FF6F30A23B26119AA5E2162B44FCD
SoC ID[0] : A05600447E4ACFDC40A9E7FC4EE45335
SoC ID[1] : 936A131A96C5C5BD3F566CDFAB6C51BB
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
HRID : 5621541C1C9E05F268AE1581D52FBECB
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : GP6BMB
CID : 150100475036424D42010A10E4D8A657
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Mon Oct 21 14:35:25 CST 2024
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20241021.143917
Locale : en-US
Patch : 2022-05-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.6]
Log Saved : 20241224_190514.log

Unlocking FRP (Factory Reset Protection) on Vivo devices such as the Vivo Y12, Y15, and Y17 using UMT (Ultimate Multi Tool) can be done if you are a professional technician or someone experienced with phone unlocking tools. Here’s a general guide to using UMT for this purpose: