Redmi Note 11 EDL Mode: How to Short Test Points for 9008 Mode

The EDL (Emergency Download Mode) points for Redmi Note 11 (models like 2201117TG, 2201117TY, 2201117TI) are used for Qualcomm-based devices to enter 9008 mode for unbricking, flashing firmware, or bypassing FRP.

How to Find and Use EDL Points on Redmi Note 11:

1. Disassemble the device:

   • Power off the phone and remove the back cover carefully.

   • Disconnect the battery to prevent power interference.

2. Locate the EDL test points:

   • On the motherboard, look for two small test points near the USB connector.

   • These points are usually labeled "EDL," "KCOLO," or "GND."

   • A schematic diagram or service manual may be required to find them accurately.

3. Trigger EDL mode:

   • Use a tweezer or jumper wire to short the test points.

   • While shorting, connect the phone to a PC using a USB cable.

   • Your device should now be detected as Qualcomm HS-USB QDLoader 9008 in Device Manager (Windows).

4. Flash Firmware:

   • Use Xiaomi Mi Flash Tool or QFIL to flash the stock firmware (Fastboot ROM).

⚠️ Warning: बैटरी कनेक्टर निकाल के टैच करना है। Opening your phone and shorting test points can void your warranty and damage the device if done incorrectly. Proceed with caution or consult a professional.

Would you like a diagram or reference images for the Redmi Note 11 EDL points?